Table of Contents
Advertisement
Operation
When the unit is plugged-in and the POWER CONTROL is in
either of the ON positions, the temperature selection is indicated
by the corresponding LED:
RED - HOT is selected
GREEN - COLD is selected
End Cap
The 12V DC plug is protected by a fuse.
Unscrew to access
If the unit fails to operate when using
and replace fuse.
the DC adapter, unscrew the end cap of
the adapter plug and check to see if the
fuse needs to be replaced. If the fuse has
blown, exchange it with a new 5 Amp
fuse and replace the cap.
Advertisement
Table of Contents
Need help?
Do you have a question about the SI714 and is the answer not in the manual?