The Asb-10; Asb-10 Connections; Asb-10 Buttons - Monitor Audio ASB-10 User Manual

The ASB-10

ASB-10 Connections

1. Auxiliary
Used to connect an analogue stereo audio source
to the ASB-10 using a 3.5mm stereo mini jack
connector (refer to page 8).
2. Mains Input
Used to connect the ASB-10 to the mains (refer
to page 9).
3. Sub Out
Used to connect the ASB-10 to an additional sub
woofer (refer to page 8).
4. Digital Coaxial Input
Used to connect digital coaxial audio source to
the ASB-10 (refer to page 7).
5. USB Input
Used for firmware updates (refer to page ___)
6. Digital Optical Input
Used to connect digital optical audio source to the
ASB-10 (refer to page 7).

ASB-10 Buttons

1. Standby
Used to put the ASB-10 in and out of stand by mode. Holding it down for 5 seconds it searches for an
internet firmware update or a USB update.
2. Input Source Toggle
Used to toggle through the Auxiliary and Digital Inputs.
3. Bluetooth
Used to select the Bluetooth input and pair devices to the ASB-10.
4. 3D Sound
Used to change the sound of the ASB-10 to create a 3 dimensional effect (refer to page 16).
5. Volume Down
Used to reduce the volume of the ASB-10.
6. Volume Up
Used to increase the volume of the ASB-10
Title: ASB-1 CONNECTOR PANEL DECAL ARTWORK V1
Date: 1st July 2014
2 3
1
1
2
AC INPUT
4
5
SUB OUT
COAXIAL
U
S
B
OPTICAL
6
3
4
5
6
N
1
2
3
4
3