Titan Implement 9300BU Series Operation And Parts Manual

Bale unroller

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9300BU Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Titan Implement 9300BU Series

  • Page 3 The above equipment and Operation and Parts Manual have been received by me, and I have been thoroughly instructed as to equipment care, adjustments, safe operation, and applicable warranty policy. Date__________________ Purchaser’s Signature_________________________________________ Titan Implement, LLC 9300BU Bale Unroller (423) 334-0012 January 2016...
  • Page 4 9300BU Bale Unroller Titan Implement, LLC January 2016 (423) 334-0012...
  • Page 5: Table Of Contents

    Placing In Storage ..... . 22 Removing From Storage ....22 Titan Implement, LLC 9300BU Bale Unroller...
  • Page 6: Introduction

    OEM 9300BU Bale Unroller equipment manuals! The bale unroller, if not used Congratulations on your choice of a Titan Implement and maintained properly, can be dangerous to users bale unroller. This equipment has been designed and unfamiliar with its operation.
  • Page 7: Specifi Cations

    CAT l & ll 1.8 Disposal of Equipment at End of Useful Life Quick Hitch Compatible The Titan Implement, LLC bale unroller has been designed for the specifi c purpose of transporting and Cylinder Standard unrolling round bales. When this unit is no longer...
  • Page 8: Safety

    If these hazard if instructions are not followed. warnings are not heeded, bodily injury or death could occur to you or to other persons. Titan Implement, LLC cannot anticipate every SAFETY possible circumstance that might involve a potential INSTRUCTIONS hazard.
  • Page 9: Safety Icon

    STOP THINK Crush hazard (chock SAFETY! Think safety wheels) Transmission in park Crush hazard (foot) Use proper support Defective or broken part Use proper tools Explosive separation hazard Fire hazard Titan Implement, LLC 9300BU Bale Unroller (423) 334-0012 January 2016...
  • Page 10: General Safety Instructions

    Hearing Loss followed. Prolonged Exposure To Loud Noise May Provide User with Literature Cause Permanent Hearing Loss! Titan Implement, LLC bale unroller owners Working environments with noise-producing must provide operator instructions to anyone...
  • Page 11: Training

    OEM manuals, and the safety signs If you do not understand any information in this manual, see your dealer or contact Titan Implement before proceeding. Do not use or allow anyone else to use this bale unroller until all information has been reviewed.
  • Page 12: Federal Laws And Regulations

    Some regulations specify that no one under the age of 16 may operate power machinery. It is your responsibility to know what these regulations are in your own area or situation. (Refer to U.S. Dept. of Labor, Employment Standard Administration, Wage & Home Division, Child Labor Bulletin #102). 9300BU Bale Unroller Titan Implement, LLC January 2016 (423) 334-0012...
  • Page 13: Sign-Off Form

    This sign-off sheet is provided for your records to 2.12 Sign-Off Form show that all personnel who will be working with the Titan Implement, LLC follows the general Safety equipment have read and understand the information in Standards specifi ed by the Farm Equipment...
  • Page 14: Nomenclature

    3. Nomenclature Item Description A-Frame 3-Point Hitch Lift Pin and Lynch Pin Articulated Arm Bale Spike Hydraulic Cylinder Hydraulic Hoses Parking Stand 9300BU Bale Unroller Titan Implement, LLC January 2016 (423) 334-0012...
  • Page 15: Operation

    When moving large round hay bales to a storage area, make sure the area is level and that the hay bale will not roll when released. Titan Implement, LLC 9300BU Bale Unroller (423) 334-0012 January 2016...
  • Page 16: Tractor Requirements

    Never operate the tractor PTO with the PTO master shield missing or in the raised position. 9300BU Bale Unroller Titan Implement, LLC January 2016 (423) 334-0012...
  • Page 17: Attaching To Tractor

    9. Adjust any lower link check chains, guide blocks, or sway blocks to prevent the bale unroller from swaying side-to-side and possible contact with the tractor rear tires. Titan Implement, LLC 9300BU Bale Unroller (423) 334-0012 January 2016...
  • Page 18: Initial Setup Checklist

    Refer to “7.2 Greasing” on page 24. Make sure the bale unroller is set for the proper bale size. Adjust if needed. Refer to “4.4 Setting the Bale Unroller” on page 17. 9300BU Bale Unroller Titan Implement, LLC January 2016 (423) 334-0012...
  • Page 19: General Operating Instructions

    Make sure that the load does not block the tractor’s SMV sign. 11. Plan your route to avoid heavy traffi c. Titan Implement, LLC 9300BU Bale Unroller (423) 334-0012 January 2016...
  • Page 20: Unrolling A Bale

    Store the hoses on the bale unroller A-Frame. CAUTION Explosive Separation Hazard Be sure all hydraulic pressure is relieved before disconnecting hydraulic line or fi ttings between the bale unroller and the tractor hydraulic system. 9300BU Bale Unroller Titan Implement, LLC January 2016 (423) 334-0012...
  • Page 21: Transporting

    Always refer to the tractor Operator’s Manual before using. to determine its compatibility and maximum safety. Working Taillights Make sure lights on the tractor are working properly. Titan Implement, LLC 9300BU Bale Unroller (423) 334-0012 January 2016...
  • Page 22: Storage

    Lower the parking stand. 5. Lower the bale unroller onto the blocks. 6. Disconnect the hydraulic hoses from the tractor. Store the hoses on the A-Frame. 9300BU Bale Unroller Titan Implement, LLC January 2016 (423) 334-0012...
  • Page 23: Service And Maintenance

    Use the correct tools, jacks, hoists, or other tools that have the capacity for the job. Titan Implement, LLC 9300BU Bale Unroller (423) 334-0012 January 2016...
  • Page 24: Greasing

    Grease zerks are located on the bale spike pins and Before performing any type of welding repair to the arm pivot bushings. the bale unroller, contact Titan Implement for approval. Repair welding must be done with care and with procedures that may be beyond the capabilities of the ordinary welder.
  • Page 25: Bolt Torque Requirements

    Grade 2 Grade 5 Grade 8 3 Radial Lines No Marking 6 Radial Lines N·m ft.lbs. N·m ft.lbs. N·m ft.lbs. 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" 7/8" 1" 1320 Titan Implement, LLC 9300BU Bale Unroller (423) 334-0012 January 2016...
  • Page 26: Service Record

    Make sure the hitch pivot bolts and hitch pin are in good condition. Do not use homemade or shop-made pins. Inspect the hitch and clevis for wear and damage. Wash the bale unroller. 9300BU Bale Unroller Titan Implement, LLC January 2016 (423) 334-0012...
  • Page 27: Warranty

    Tennessee, Southern Division, and (c) waive any objection it may have as to any such action or proceeding brought in such court that such court is an inconvenient forum. Nothing herein shall limit the right of Purchaser or Titan Implement, LLC (or the right of any permitted successor or assign of either) to bring proceedings against the other in the courts of any other jurisdiction wherein any assets of such other party may be located.
  • Page 28 9300BU Bale Unroller Titan Implement, LLC January 2016 (423) 334-0012...
  • Page 29 IMPLEMENT WARRANTY REGISTRATION FORM Bale Unroller THIS REGISTRATION FORM MUST BE ON FILE WITH TITAN IMPLEMENT, LLC. WITHIN 30 DAYS OF DELIVERY TO PURCHASER, OR WARRANTY CLAIM WILL NOT BE HONORED. PLEASE RETURN COMPLETED FORM BY E-MAIL, FAX, OR MAIL: E-MAIL: info@titanimplement.com...
  • Page 30 9300BU Bale Unroller Titan Implement, LLC January 2016 (423) 334-0012...
  • Page 31: Parts

    9. Parts Replacement parts are available from your authorized Dealer Parts Department or from Titan Implement. 9.1 9300BU Bale Unroller Item Part Number Description Qty. Item Part Number Description Qty. 930100 Center Frame Tube - Red Cylinder Side Bracket Bolt &...
  • Page 32 Notes 9300BU Bale Unroller Titan Implement, LLC January 2016 (423) 334-0012...
  • Page 33 Notes Titan Implement, LLC 9300BU Bale Unroller (423) 334-0012 January 2016...
  • Page 34 Notes 9300BU Bale Unroller Titan Implement, LLC January 2016 (423) 334-0012...
  • Page 36 Form No. 9300M Printed in USA 09/2016...

Table of Contents