Specifications - Sharp XL-MP131 Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General
Power source AC 120 V, 60 Hz
Power 88 W
consumption
Dimensions Width: 7-1/4" (185 mm)
Height: 10-1/4" (260 mm)
Depth: 12" (307 mm)
Weight 13.7 lbs. (6.2 kg)
Amplifier
Output power 85 watts minimum RMS per channel into 6
ohms from 100 Hz to 20 kHz, 10% total har-
monic distortion
Output terminals Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Input terminals Video/Auxiliary (audio signal):
500 mV/47 k ohms
CD player
Type 5-disc multi-play compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency 20 - 20,000 Hz
response
Dynamic range 90 dB (1 kHz)
Tuner
Frequency range FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
Cassette deck
Frequency 50 - 14,000 Hz (normal tape)
response
Signal/noise ratio 50 dB (recording/playback)
Wow and flutter 0.3 % (WRMS)
Speaker
Type 2-way type speaker system
2" (5 cm) tweeter
5-1/8" (13 cm) woofer
Maximum input 170 W
power
Rated input power 85 W
Impedance 6 ohms
Dimensions Width: 7-1/4" (185 mm)
Height: 10-1/4" (260 mm)
Depth: 9-1/16" (230 mm)
Weight 6.1 lbs. (2.8 kg)/each
XL-MP131
41