Sharp XL DK227N Operation Manual page 17

To insert iPod adaptor
1. Press the ON/STAND-BY button to turn the power on.
2. Open the iPod docking station by pushing the area marked
" PUSH OPEN".
3. Insert the iPod adaptor into the ipod dock and connect your iPod.
iPod (bottom)
Dock connector
iPod dock
iPod connector
Caution:
Do not place the iPod docking base without any support from below
when inserting the iPod unit, otherwise it may damage the iPod
docking station.
To remove iPod unit
Press and hold the iPod docking
base when removing the iPod unit.
iPod
iPod adaptor
To remove iPod adaptor
1. Adaptor with tip.
Hold this tip and pull as direction shown to
remove adaptor
2. Adaptor without tip.
Insert the tip of a screwdriver ("–" type, small) into the iPod adaptor
hole as shown and lift upward to remove)
iPod playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the iPod button to select iPod function.
3
Insert iPod unit in iPod dock of main unit. "DOCK OK" will
be displayed for 3 seconds except for iPod mini and 4th
Generation iPod.
iPod
iPod adaptor
4
Press the / button to start playback.
XL-DK227N
pull up
17