Phoenix Contact IBS IL 24 BK-T/U Datasheet

IBS IL 24 BK-T/U
INTERBUS Inline Bus Terminal
Data Sheet 6291A
This data sheet is only valid in
association with the "Configuring and
Installing the INTERBUS Inline
Product Range" User Manual
IB IL SYS PRO UM E.
This bus terminal replaces the
IBS IL 24 BK-T bus terminal, which
was supplied until now (see page 7).
Function
The bus terminal connects an Inline station to the
INTERBUS remote bus and provides the supply
voltages for the connected devices.
Features
– Remote bus connections using copper
cables
– Can supply an Inline station with all of the
required 24 V voltages for low-level signals
– Electrical isolation of the remote bus
segments
– Automatic configuration of the outgoing
interface as remote bus interface or local bus
interface
– Support of up to 15 connected terminals with
remote bus branch
6291A
10/2001
Figure 1
Please note that the connectors are
not supplied as standard with the
terminal. To order these connectors,
please refer to the "Ordering Data" on
page 22.
The end plate is supplied with the bus terminal.
Place this plate at the end of the Inline station.
The end plate does not have any electrical
function. It protects the station from ESD pulses
and the user from dangerous voltage.
IBS IL 24 BK-T/U terminal with
connectors and end plate
1