Cd Playback; Listening To A Cd (Cds); Cd Play Indicator; Cd Indicator - Sharp CD-ES600 Operation Manual

Listening to a CD (CDs)

CD-ES600
CD-ES66
This system can also play audio CD-R and CD-RW discs, but can-
not record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.
16

! CD playback

1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the 1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
4
Place the CD on the disc tray 1, label side up.
Be sure to place 3" (8 cm) CD in the middle of the disc trays.
5
Press the OPEN/CLOSE button to close the disc tray 1.
Total number of tracks on
the CD whose number is
flashing
" " will appear.
6
You can place discs on the trays 2 - 5 by following steps
3 - 5.
7
Press the / button to start playback.

CD play indicator

5" (12 cm) 3" (8 cm)
Total playing time of the
CD whose number is flash-
ing