Safety Notes - LeuchtKraft TWIST-40LED Instruction Manual

LED Moving Head
These instructions are intended for the installer
of the unit and for operators with basic knowl-
edge in DMX control . Please read the instruc-
tions carefully prior to operation and keep them
for later reference .
1 Applications
The LED moving head TWIST-1LED is designed
for effect illumination, for example, on stage
or in clubs . As a light source, it uses a power-
ful 40 W LED (4-in-1 RGBW OSRAM LED) . The
LED moving head TWIST-1LED is designed for
operation via a DMX light controller; however,
it can also be operated independently, running
different automatic or music-controlled light
show programs .
1.1 Features
5 Extremely narrow, bright and fast beam
5 Additional effect ring with 12 RGB LEDs
5 16 or 21 DMX channels
5 Pan: 540°; tilt: 210°
5 Stroboscope
5 High efficiency, low power consumption
5 Compact size, low weight
5 Beam angle: 8°
5 Diffusion disc for wash effects
frosted cover
mirror plate for the effect ring
8

2 Safety Notes

The unit corresponds to all relevant directives of
the EU and is therefore marked with
WARNING The unit uses dangerous mains
voltage . Leave servicing to skilled
personnel only and do not in-
sert anything into the air vents .
Inexpert handling of the unit may result in
electric shock .
•
The unit is suitable for indoor use only . Pro-
tect it against dripping water, splash water
and high air humidity . The admissible ambient
temperature range 0 – 40 °C .
•
The heat generated inside the unit must be
dissipated by air circulation; never cover the
air vents of the housing .
•
Immediately disconnect the mains plug from
the socket
1 . if the unit or the mains cable is visibly dam-
aged,
2 . if a defect might have occurred after the
unit was dropped or suffered a similar
accident,
3 . if malfunctions occur .
In any case the unit must be repaired by
skilled personnel .
•
Never pull the mains cable to disconnect the
mains plug from the socket, always seize the
plug .
•
When transporting the unit, always seize its
lower part . Never carry the unit by its moving
head or rotary arm .
•
No guarantee claims for the unit and no
liability for any resulting personal damage
or material damage will be accepted if the
unit is used for other purposes than originally
intended, if it is not safely installed or not
correctly operated, or if it is not repaired in
an expert way .
If the unit is to be put out of operation
definitively, take it to a local recycling
plant for a disposal which is not harm-
ful to the environment .
.