Hookup Diagrams - Mackie MX Series Owner's Manual

Hookup Diagrams

48V
MUTE MUTE MUTE MUTE MUTE MUTE MUTE MUTE MUTE
Displayed above is a fairly typical MX Series amplifier setup. In short, it's two ins, two outs.
In this example, cables from the mixer's left and right main output jacks are connected to the ch. 1 and ch. 2 input
jacks of the MX Series amplifier. The speaker outputs of the MX amp are then connected to the inputs of a pair
of passive loudspeakers [Mackie DRM212-P in this example]. Make sure that the amp mode is set to "stereo".
In stereo mode, both gain controls
are used to achieve a nice balance.
Stereo Setup
Stereo
5
Owner's Manual