Robe RoboSpot User Manual page 16

Exposure- you can choose from three levels (Low, Medium, High) of a light intensity in the position circle on
the screen to see objects hidden from reason of high light intensity in the position circle on the screen. The
item Auto switches off this function.
Reconnect- the item disconnects and again connects active camera to the RoboSpot. Use the item in case that
behaviour of the camera is not correct (e.g. long response time).
Factory Reset- use this item to set a camera to the current setting.
All items stated above relate to the selected camera in the menu bar.
When you switching between cameras, a field with video synchronization status is displayed. This field shows
a delay between the camera and the screen. The value 0% means max. delay, 100% is without delay (and this
field will disappear from the screen after reaching 100%).
Every camera holds information about position of the position circle, its size and picture rotation.
User menu
Blackout Display - use the item to darken the screen. To active the screen, touch it.
Network Test - the item runs a connection test between a camera and the RoboSpot. Do not touch any buttons
on the FollowSpot controller.
Trace Cursor - if the function is on, a blue circle will appear during (behind a red position circle) which gives a
target position of the position circle (beam image) during its movement.
Pan Invert - the item inverts a pan movement
Tilt Invert - the item inverts a tilt movement
Device - the menu allows you to select a device with camera. Correct device has to be chosen
if the "Trace Cursor" function is to work correctly.
MotionCamera - select the item if you use the RoboSpot Motion Camera.
BMFL Follow Spot - select the item if you use the Robin BMFL FollowSpot with camera.
16