Multi-Function Controller; Setup (Refer To Menu - Controllers.); Operation - QSC MP-M80 User Manual

Multi-Function Controller

The controller controls volume, source, and scene selection with
the available parameters and limits that were assigned to the zone
during setup.
Setup
Refer to Menu – Controllers.

Operation

Starting from Sleep mode:
Pushing any button wakes the MFC but does nothing else. Upon waking,
the MFC displays the following based on how it was confi gured by the installer.
• MFC friendly name as defi ned during MFC setup.
• Current Source (friendly name) To select a different source:
a. Press Enter, a list of available sources display.
b. Use Up and Down buttons to highlight a new Source.
c. Press Enter to fi nalize selection.
• To select a new Scene:
a. Press Enter two times, a list of available Scenes display.
b. Use Up and Down to highlight a new Scene or "EXIT".
c. Press Enter to fi nalize selection.
• To adjust the Volume:
With the Volume indicator visible, use the up and down buttons to make the change.
TD-001578-01-A
Friendly name
Current source
Volume indicator
Enter
Down
53
MFC Name
Source
Volume:
60
Up