Advertisement
LAMP HEAD AIMING – Remove lens covers as shown in step 1. Lamp heads may be aimed by
grasping them at the base and rotating them to aim at the desired location. Lamp head only rotates
approximately 135° which is enough to aim in any direction whether mounted on wall or ceiling.
AC FUSE AND AC OR DC DISCONNECT SWITCH OPTIONS – If ordered, these options can
be found under the right lamp head lens.
TAMPERPROOFING – If ordered, install this option using the included screw kit which includes
two flat head screws, two pan head screws and a tamperproof Torx T-15 bit.
Philips Lighting North America Corporation
200 Franklin Square Drive
Somerset, NJ 08873, USA
Phone: 855-486-2216
www.philips.com/luminaires
MAINTENANCE
Philips Lighting Canada Ltd.
281 Hillmount Road,
Markham ON, Canada L6C 2S3
Phone: 800-668-9008
www.philips.com/luminaires
9140053520 February 2016
Advertisement
