Sharp DT-500 Operation Manual page 14

Numbers in Z refer to the main pages in this operation manual where the topic
is explained.
STANDBY button
For putting the
projector into the
standby mode.
KEYSTONE button
For entering the
Keystone Correction
mode.
RETURN button
For returning to the
previous menu screen
during menu operations.
AUTO SYNC button
For automatically
adjusting images
when connected to a
computer.
RGB/COMP. button
For switching to the
respective input signal type.
FREEZE button
For freezing images.
Backlight button
For lighting all buttons on the
remote control.
Using the Kensington Lock on the projector
• This projector has a Kensington Security Standard connector for use with a Kensington
MicroSaver Security System. Refer to the information that came with the system for instructions
on how to use it to secure the projector.
29
32
41
46
48
38
ON button
28
For turning the power on.
INPUT 1, 2, 3, 4, 5 and 6
29
buttons
For switching to the
respective input modes.
MENU button
41
For displaying adjustment
and setting screens.
Adjustment buttons
41
(P/R/O/Q)
• For selecting menu items.
• For adjusting the Keystone
Correction when in the
Keystone Correction mode.
ENTER button
41
For setting items selected
or adjusted on the menu.
RESIZE button
36
For switching the screen
size (STRETCH, SIDE
BAR, etc.).
38 PICTURE MODE button
For selecting the appropriate
picture.
IRIS button
38
For switching "HIGH
BRIGHTNESS MODE" and
"HIGH CONTRAST MODE".
IMAGE SHIFT buttons
38
For shifting the projected
image vertically.
13