Table of Contents
Advertisement
7.4.3- Country
You can not access the Country option from
the Options menu. The country selected
during the initial use will automatically
displayed in the menu.
7.4.4- Game Mode
In the Options menu, you can set the Game
Mode tab to On/Off by pressing the Right/
Left buttons. When the Game Mode is set to
On, display settings will return to the default
values.
Game Mode becomes active only for PC,
HDMI and YPBPR sources. When the Game
Mode is set to ON for these sources, picture
mode in the Picture menu will switch to the
Game Mode. Only colour temperature and
backlight settings can be changed in this
mode. Game Mode provides a considerable
increase in the picture quality when the TV is
used as a monitor for game consoles and for
displaying the text files. It is advised to turn
this mode off when you would like to watch a
movie from the above mentioned sources.
7.4.5-Software Update
When a new software is found through OAD
(On Air Download) from this menu, it will
be installed automatically. Select Software
Update tab and press the OK button. Your
television will start to search for a new
software and perform the software install
process if a new software exists.
Note: Software Update tab is not displayed in
the Analogue mode.
7.4.6-Decoder Setting
You can set the Decoder Setting tab to On/
Off by pressing the Right/Left movement
buttons. When it is set to ON, RF signal
will be output from the SCART output. This
option must be set to ON when a Decoder
is connected to SCART. When this option
is set to OFF, RF signal will not be output
from the SCART output. This option appears
in the menu when the Signal Source is set
to SCART. It is not displayed in the menu in
other options.
7.5-Parental Control
Lock System
Set PIN
Block Programme
Parental Guidance
Panel Lock
Select
In the Parental Control menu, you can
preclude channels that are not appropriate for
children and set age restriction for programs
being broadcasted. Password screen will be
displayed when entering this menu. The menu
will open only when the correct password is
entered. The default password is set as 0000.
You can change the password from the Set
PIN menu as you wish.
7.5.1-Lock System
When the Lock System feature is set to On ,
a password is prompted if you want to enter
in the Auto Tuning, Digital Manual Tuning,
Analogue Manual Tuning submenus in the
Channel Setup menu and the Program
Table menu. These menus are not accessible
unless the correct password is entered.
7.5.2-Set PIN
You can change your Parental Control
password from this menu as you wish. To do
this, select Set PIN tab and press OK button.
Set PIN menu will be displayed. Once you
enter your new password two consecutive
times, your password will be changed.
7.5.3-Block Programme
With the Block Program feature, you can
lock the desired channel and prevent it from
being viewed unless the correct password
is entered. To do this, select Block
Programme tab from the Parental Control
menu by pressing the UP/Down movement
buttons and confirm your selection with
OK button. Block Programme menu will
be displayed. Select the channel you want
22
PARENTAL CONTROL
Off
Off
Off
Back
Exit
Advertisement
Table of Contents
