Table of Contents
Advertisement
Technical Information
Boiler
Wattage
Type
Capacity
Continuous Fill
Steam Pressure
Steam at source
Vacuum
Type
Motor
Noise Level
Electrical
Voltage
Low Voltage Controls
Cord length
Nominal input power
Hand-arm Vibration Level
Trouble Shooting
Symptom
No Power
No Steam
No Steam, Just
Water
Steam Leaking
from front socket
8
1600W
Stainless Steel
3.3 Litres
Yes
8 Bar
185°C >
Integral
850 watts
67 dB(A)
110V ~ single phase
5V
4m
1650 watts
<2.5m/s
Possible Cause
Faulty wall socket or not
connected
On/Off switch not illuminated
Unknown
Steam Control turned down
fully clockwise
Steamer not ready
Clean water tank is low
(Beeping Sound & "Refill
Clean Water" light is
illuminated)
Unknown
Steamer not ready
Boiler at pressure and not
heating (temperature less than
110 ºC
Unknown
"O" Rings split
"O" rings worn
Capacities
Boiler
Cold Water Tank
Collection Tank
Detergent Tank
Dimensions
Height
Height with handle & basket 97cm
Depth
Depth with handle & basket 70cm
Width
Net Weight
Package height
Package depth
Package width
Package gross weight
Action Required
Check connection to wall socket and socket
switch. Try other wall socket
Press to the On position
Call for service
Turn the control half way
Wait for the "Steam Ready" light on the front
of the machine to illuminate
Pour CLEAN COLD WATER into the clean
water tank. The beeping will stop. Await for
the "Steam Ready" light to illuminate.
Call for service
Wait for the "Steam Ready" light to illuminate
Hold the steam switch on for approximately
one minute, even if just water is coming out.
This will result in the heater coming back on
Call for service
Change and re grease "O" Rings. To avoid
this happening ensure "O" rings are grease
before every use
Change and re grease "O" Rings. To avoid
this happening ensure "O" rings are grease
before every use
3.3 Litres
5 Litres (easy fill)
12 Litres
2.5 Litres (easy fill)
74cm
50cm
45cm
35kg
80cm
81cm
53cm
52 kg
Advertisement
Table of Contents
