Sharp AL-840 Operation Manual page 7

Windows 95/Windows NT 4.0:
Load paper into the paper tray of the printer. For loading of paper, see the section on
1
LOADING COPY PAPER in the copier operation manual.
Turn on the printer.
2
Turn on your computer and start Windows.
3
Before installing the printer driver, be sure to close all other applications which
may be open.
When using Windows 95 on a personal computer with plug & play*, the "Update
4
Device Driver Wizard" window will appear. Insert the installation CD-ROM into the
CD-ROM drive. Click the Next button and follow the on-screen instructions. Proceed
to step 7. If the "Copying Files" window appears during this operation, enter R:\ (if the
CD-ROM is designated as drive R) and click the OK button.
If you use Windows 95 and the "New Hardware Found" window will appear, click
the Driver from Disk Provided by Hardware Manufacturer button and then click
OK. Proceed to step 6.
If you use Windows 95 and the screen shown above or the "New Hardware Found"
window does not appear, proceed to step 5.
If you use Windows NT 4.0, proceed to step 5.
Plug & play
This feature is effective if both the computer and peripheral equipment are equipped
with IEEE 1284 compliant parallel interface.
The screen displayed depends on the version of Windows.
INSTALLING THE PRINTER DRIVER SOFTWARE
1
5