Chv Code; Your Phone's Mode - Samsung SCH-A399 User Manual

G G e e t t t t i i n n g g S S t t a a r r t t e e d d

CHV Code

The CHV code supplied with the UIM card helps you
protect the UIM card against unauthorized use.
When requested the code, key in the appropriate
code (displayed as asterisks for security). If you enter
an incorrect CHV code three times in succession,
your UIM card is blocked. To unblock the card,
contact your service provider.
You can enable or disable the code using the R-UIM
Setup menu option (9-0). For further information on
the CHV code, see page xx.

Your Phone's Mode

Standby Mode
Standby is the most basic state of your phone. The
phone goes into Standby mode soon after you turn it
on, or whenever you briefly press
phone is in Standby mode, you will typically see the
current date and time. If you enter a phone number,
you can press to dial it, or press
in the internal phone book.
Press at any time to return to Standby mode. Be
careful; if you are on a call when you press
will return to Standby mode, but it also disconnects
the call. Press several times or hold it down to
return to Standby mode without ending the call.
24
. When your
to save it
, you
Talk Mode
You can place and answer calls only when your phone
is turned on. During a call, the phone is in Talk mode.
While you are in Talk mode, pressing
list of options referred to as "In-Call Options." See
page xx for details on the options.
Power Save Mode
Your phone comes with a Power Save feature that will
automatically be activated if your phone is unable to
find a signal after 15 minutes of searching. While this
feature is active, the phone's battery charge will
conserved. The phone will automatically recheck for a
signal periodically.
To manually force the phone recheck for a signal, press
any key. A message on the display let you know when
your phone is operating in Power Save Mode.
Lock Mode
When you lock your phone using the Lock Mode
menu option (see page xx), you cannot use the phone.
Even in Lock mode, you can receive messages and
calls, but cannot place an outgoing call until you
unlock the phone.
To unlock the phone, press
code. The phone returns to Standby mode.
G G e e t t t t i i n n g g S S t t a a r r t t e e d d
gives you a
, and enter the lock
25