Safety Instructions; Pressure Equipment Directive; Certificate Of Conformity Tr Cu (Eac Marking) - Tecfluid FLOMAT Series Instruction Manual

10

SAFETY INSTRUCTIONS

The series FLOMAT flowmeters are in conformity with all essential
requirements of all EC directives applicable to them:
2014/68/EU
2014/30/EU
2012/19/EU
2011/65/EU
The declarations UE of conformity can be downloaded from the section "Download" of the
Tecfluid S.A. website.
10.1

Pressure equipment directive

Series FLOMAT of flowmeters, due to their size, are not subject to conformity assessment,
are considered outside the scope of the directive and therefore they have not the CE mark
according to pressure directive. These devices are subject to applicable sound engineering
practice (SEP).
This equipment is considered as being a pressure accessory and NOT a safety accessory as
defined in the 2014/68/EU directive, Article 2, paragraph 4.
10.2 Certificate of conformity TR CU (EAC marking)
Tecfluid S.A. have subjected the series FLOMAT of flowmeters to a
certification procedure according to the technical regulations of the
Customs Union of the Eurasian Economic Union (EEU).
This Certificate is an official document confirming the quality of production with the
standards on the territory of the Customs Union, particularly regarding safety requirements
and electromagnetic compatibility.
Pressure equipment directive (PED)
Electromagnetic compatibility directive (EMC)
Waste electric and electronic equipment (WEEE).
Restriction of the use of certain hazardous
substances in electrical and electronic equipment
(ROHS).
www.tecfluid.com
33