GE GSM507 Use And Care Manual page 8

How to load your dishwasher
How to load the TOP RACK
This is a random mixed load, the most common type you
will have.
Make sure dishes are properly loaded to insure that
water can reach the soiled surfaces. The wash arm in the
bottom sprays
waterup. The towerthat rises in the
center sends water out over the dishes to wash the items
in the upper rack.
WAXH OUT FOR THIS.
The wash tower rises through the center of the bottom
rack during the wash and rinse portions of the cycle.
Don't block it or load tall things next to it. Also, be
careful not to let portion of an item such as a pot or dish
handle extend through the bottom rack. This could
block the wash,arm and cause poor washing results.
Place tall glasses, mugs, tumblers and stemware in the
deep front section. The shallow rear section is ideal for
cooking and serving utensils. Make sure that all
items—front and rear sections—do not extend above the
side wires of the rack. Arrange stemware so that It
cannot move easily. Don't let glasses touch each other.
This rack is ideal for dishwasher-safe plastics. Load
small shallow items in the rear section; larger, deeper
bowls in front section. If loading plastic tumblers in
deep front section, be sure that each plastic tumbler is
secured over two fingers.