GE GSM507 Use And Care Manual page 13

Table of Contents

Advertisement

PROBLEM
POSSIBLE CAUSE AND REMEDY
SMALL AMOUNT OF
Water around the outlet on the tub bottom at the back of the tub is normal. It is clean
WATER STANDING
water. It's there to keep the water seal lubricated.
IN THE BCXMOM
OF THE TUB
WATER WON'T PUMP
If the entire bottom of the tub has water, you may have a drain problem. Clean the air
OUT OF THE TUB
gap, if you have one. (See page 14.)
Check the kitchen sink. Is it draining well? Youmay need a plumber.
If dishwasher drains into disposer, run disposer to clear. Be sure disposer is not
clogged.
SUDS IN THE TUB
Sudsing detergents are not meant for dishwashers. USE ONLY AUTOMATIC
DISHWASHER DETERGENTS 'K) AVOIDSUDSING.
To remove suds from the tub: Open the dishwasher. Let suds evaporate. Add 1 gallon
of cold water to the tub. Close and latch the dishwasher. Pump out water by slowly
turning the control dial until a drain period is reached.
Repeat if necessary.
DISHWASHER LEAKS
Suds can cause unit to overflow. That's why it's so important to use a detergent that's
designed for automatic dishwashers.
Spilling the rinse agent can cause foam during washing. This can lead to overflowing.
Wipe up accidental spill of rinse agent with a damp cloth.
L
If you need more help.. call, toll free:
GE Answer Center@
800.626.2000
consumer information service
4)
\

Advertisement

Table of Contents
loading

Table of Contents