Table of Contents
Advertisement
Hint for Timer Recording
• If there is a power failure or the VCR/DVD has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.
• If a tape is not in the VCR/DVD or does not have the record tab, the TIMER and
Please insert a recordable tape.
• If a tape ends during timer recording, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER and
lights flash. (If the DVD power is off, the VCR will become STANDBY status).
• When all timer recordings are finished, the TIMER and
• When timer recordings are set, theTIMER and
SUBTITLE/T-SET button so that the TIMER and
VCR or DVD mode, then continue with the other features as described in this manual.
If you want to use the DVD player during a VCR timer recording or while the TIMER and
• You can use the DVD player while the TIMER and
turn on the VCR/DVD. Press the DVD button on the remote control to choose DVD mode, then continue with the other DVD features as
described in this manual. You don't have to set the TIMER off to use the DVD only.
Copying a Video Tape
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
(Back of another source)
AUDIO OUT
1
L
DVD/VCR
VCR
or
COMPONENT
AUDIO OUT
AUDIO IN
VIDEO OUT
ANT-IN
DIGITAL
Y
L
L
AUDIO OUT
Connect
R
C
B
R
R
VIDEO OUT
VIDEO IN
VIDEO OUT
ANT-OUT
COAXIAL
C
R
Audio/Video cables
(supplied)
Hint
Hint
• For best results during dubbing, use the front panel controls whenever possible. The
remote control might affect another source's operation.
• Always use video-quality shielded cables with RCA-type connectors. Standard audio
cables are not recommended.
• You can use a video disc player, satellite receiver, or other audio/video component with
A/V outputs.
• "L1" or "L2" is found before the lowest memorized channel. (Example: CH02)
• "L2" input jacks are on the front of this VCR/DVD.
MTS System (Multi-Channel Television Sound)
When You Receive or Record a
Program Broadcast in MTS
• When you receive a broadcast on
the VCR, you can check the type
of the broadcast by pressing the
DISPLAY button.
• When "TV STEREO" or "SAP"
selection is valid, select them by
following steps. This selection is
needed when you record the pro-
gram.
• SAP means Second Audio
Program (usually second lan-
guage).
Display on the
Type of
STEREO/SAP
TV screen
broadcast
Regular
-None-
(monaural audio)
Stereo
STEREO
broadcast
TV STEREO
(main audio program)
Bilingual
SAP
broadcast
(second audio program)
TV STEREO
Stereo &
(stereo main audio program)
STEREO
Bilingual
SAP
broadcast
(second audio program)
lights will flash.
lights will appears. To use the VCR as usual until the time for the recording, press the
lights disappear. Press the VCR/TV button to choose the VCR position. Select either
lights are on or flashes, or during a timer recording. Press the POWER button to
(Back of Recording VCR/DVD*)
2
DVD
DVD/VCR
VCR
AUDIO
S-VIDEO
COMPONENT
AUDIO OUT
AUDIO IN
Connect
VIDEO OUT
OUT
OUT
ANT-IN
Y
L
L
L
C
R
R
B
VIDEO OUT
VIDEO IN
ANT-OUT
R
C
R
Round Coaxial cable
(supplied)
*Front input jacks are also available
VCR
VCR
1
1
MENU
or
2
2
To exit the menu.
CLEAR/
C.RESET
When You Play Back a Tape
Recorded in Hi-Fi Stereo
Selection
-Invalid-
• If you have connected a stereo TV to
-Invalid-
this VCR/DVD, select "STEREO".
• If you have connected a monaural TV
to this VCR/DVD, select "MONO".
SAP
Your Selection
Type of recorded tape
SAP
non Hi-Fi tapes
Hi-Fi tapes
recorded in
Hi-Fi stereo
Hi-Fi tapes
recorded main
audio program
Hi-Fi tapes
recorded second
audio program
lights flash and timer recording cannot be performed.
1) Insert a pre-recorded tape into the playing VCR.
(Back of TV)
2) Insert a tape with its record tab into the recording
VCR/DVD.
3) Press
the SPEED button on the remote control of the
recording VCR/DVD to select the desired recording
speed (SP/SLP).
4) Select the "L1" or "L2" position on the recording VCR/DVD.
• To use the input jacks on the back of this unit, select
"L1" position by pressing [0], [0], [1] on the remote
control or the SKIP/CH. (K
• To use the input jacks on the front of this unit, select
"L2" position by pressing [0], [0], [2] on the remote
control or the SKIP/CH. (K
5) Press the REC button on the recording VCR/DVD.
6) Begin playback of the tape in another source.
7) To stop recording, press the STOP/EJECT button on
the recording VCR/DVD, then stop playback of the tape
in another source.
VCR
1
-MENU-
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
B TV STEREO
[ON]
SAP
Select "TV STEREO" or
"SAP"
2
STEREO
MONO
L-channel
R-channel
3
Monaural
Monaural
Monaural
L
R
L+R
Main audio
Main audio
Main audio
program
program
program
Second audio
Second audio
Second audio
program
program
program
– 15 –
lights are on or flashes.
K
L
/L
) buttons.
K
L
/L
) buttons.
VCR
VCR
VCR
1
MENU
-MENU-
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
B AUDIO OUT
TV STEREO
SAP
or
2
AUDIO OUT
B HIFI
or
MONO
Select "HIFI" or "MONO"
3
To exit the menu.
CLEAR/
C.RESET
[ON]
[ON]
EN
Advertisement
Table of Contents
