Titling A Minidisc - Sharp MD-SR50H Operation Manual

Titling a MiniDisc

Creating disc and track names
One disc name and up to 255 track names can be created
per disc (A maximum of 100 characters for the disc and
each track name and a total of 1,700 characters can be
entered).
1
Disc name
Whilst in the stop
mode, press the
EDIT button to select
"DISC NAME".
2
Press the ENTER/SYNC button.
Cursor
The unit will enter the character input mode.
To cancel the operation, press the • /:OFF
button.
32 31
3
Press the DISP button repeatedly to select
the type of characters.
(Capital letters) (Lower-case letters) (Numbers and symbols)
Track name
The first 3 characters in the group of the selected
characters will be displayed for about 1 second.
Whilst in the pause
mode, press the
4
Press the 5
EDIT button to select
select the letter.
"TRACK NAME".
5
Press the ENTER/SYNC button to enter it.
Position where the next letter will be entered
6
To enter more letters, repeat steps 3 - 5.
7
When the name has been completely en-
tered, press the EDIT button.
5 or 4 4 button repeatedly to
5 5 5 4 4 4