Wall Mount; Button Function - ECOWITT DS-102 Instruction Manual

2.2 Wall mount

You can mount this item on a wall by using a screw (not
included)

3. Button Function

"SET" BUTTON:
In normal display, press "SET" button to alternate the

display of time, date and logging intervals
In normal display, press "SET" button for 2 seconds to enter

setting mode
In normal display, press "SET" and "+" buttons at the same

time for 5 seconds to enter Calibration mode
"+" BUTTON:
In normal display, press "+" button to alternate the display

of Max, Min and current temperature & humidity
In setting mode, press "+" button to increase the value of

information being set.
In Max/Min mode, press "+" button for 2 seconds, the Max

or Min value will be reset to current reading
"-" BUTTON:
In normal display, press "-" button for 2 seconds to clear the

history data
In setting mode, press "-" button to decrease the value of

information being set.
6