Cycle Mode; Acyclic Mode; Segmented Mode - ECOWITT DS-102 Instruction Manual

4.6.1 Cycle Mode

If Cycle Mode selected, the icon
In Cycle mode, when the memory is full, the oldest data sets
stored will be overwritten by the new ones entered.

4.6.2 Acyclic Mode

If Acyclic Mode selected, the icon
In Acyclic Mode, when the memory is full, logging stops.
Logging will continue when memory is cleared via the PC
software.

4.6.3 Segmented Mode

You can set max. 4 time periods through the setting menu on
the PC software. These periods can't be overlapped. The time
period must be later than the current time. It will start logging
from the set start time and stop from the set end time in a time
period.
Time period icon
Time period 1
Time period 2
Time period 3
Time period 4
If time period was selected, the time period icon circle frame
will display.
will display
10