Table of Contents
Advertisement
Display & Control Panel Guide
8
9
11
1
2
3
1
Menu/Function Button
2
Filter 1 indicator / Reset Button
3
Filter 2 indicator / Reset Button
4
NO/OFF Button
5
Alkaline Selector Button
6
Purified Selector Button
7
Acidic Selector Button
8
Filter 1 / Filter Life Indicator
9
Filter 2 / Filter Life Indicator
10
Operation Display
11
Cleaning Indicator Display
12
Outflow Indicator Display
13
Level Indicator Display
10
10
13
14
15
16
12
4
5
6
14
Alkaline Water Indicator Display
15
Purified Water Indicator Display
16
Acidic Water Indicator Display
17
pH Indicator Display
Installation to Faucet(Counter top)
17
7
5
Connect hoses to the water Inlet and Acidic water Outlet.
Remove the aerator
1
from the faucet.
Remove the compression nut
3
from the diverter valve and
thread the plastic supply
tubing through it, making
sure to keep the threads of
the compression nut facing
the diverter valve.
Compression nut
Tubing (3/8")
OUTLET
INLET
Cold Water Inlet
(3/8 inch tubing)
Attach the diverter valve to
2
the faucet using any included
adapter rings necessary. Be
sure to clean any exposed
threads and apply plumbers
tape to prevent leaks. If
installing to a faucet,
please contact your dealer
for informationon a
specialty adapter that
may be required.
Gasket
Adapter ring
Diverter Valve
Attach the plastic supply
4
tubing to the diverter by
pressing it onto the compres-
sion nipple and securing
the compression nut to the
diverter valve.
Acidic Water Outlet
(1/4 inch tubing)
11
Advertisement
Table of Contents
