Before Operating; Part Names; To Set The Clock; Stop/Clear - Sharp R-1200 Operation Manual & Installation Instructions

P A R T N A M E S
Words in the lower portion of the display will light to indicate what function is in progress.
16 23
25 25
Number indicates pages on which there are feature descriptions and usage information.
B E F O R E O P E R A T I N G
• Before operating your new microwave oven make sure you read and understand this operation manual completely.
• Before the oven can be used, follow these procedures:
1. Plug in the oven. Close the door. The oven display will then begin flashing
2. Touch the STOP/CLEAR pad.
3. Set clock.

TO SET THE CLOCK

• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
P R O C E D U R E
TIMER
1
CLOCK
Touch CLOCK pad.
2
1 2 3 0
Enter the correct time
of day by touching the
numbers in sequence.
TIMER
3
CLOCK
Touch CLOCK pad again.
CONTROL PANEL
18-19
:
will appear.
D I S P L A Y
: 0
12:30
12:30
16
20-21
22
17 25
16
8 8 : 8 8
This is a 12 hour clock. If you attempt to enter an
incorrect clock time,
ERROR
Touch the STOP/CLEAR pad and re-enter the time.
• If the electrical power supply to your microwave oven
should be interrupted, the display will intermittently
show after the power is reinstated. If this
8 8 : 8 8
occurs during cooking, the program will be erased.
The time of day will also be erased. Simply touch
STOP/CLEAR pad and reset the clock for the correct
time of day.

STOP/CLEAR

Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
Indicators
.
will appear in the display.