Before.operating; To Set The Clock; Timer; Stop/Clear - Sharp KB-6002L Operation Manual

beFOre OperatinG
before operating your new microwave Drawer make sure you
read and understand this operation manual completely.
before the microwave Drawer can be used, follow these
•
steps:
Plug in the microwave Drawer.
1
WAVE TOUCH CLEAR
appear.
Touch the Stop/Clear pad.
2
Set clock.
3

tO set tHe ClOCk

Touch Timer/Clock pad and number 2.
1
Touch number pads for correct time of day and touch
2
Timer/Clock pad again.
This is a 12 hour clock. if you attempt to enter an incorrect
clock time, will appear in the display. Touch the
ERROR
Stop/Clear pad and re-enter the time.
• if the electrical power supply to your microwave Drawer
should be interrupted, the display will intermittently show
ENJOY YOUR MICRO-
AND TOUCH CLOCK
this occurs during cooking, the program will be erased. The
time of day will also be erased. Simply touch Stop/Clear
pad and reset the clock for the correct time of day.
Note:
• The microwave Drawer can be programmed with the
drawer open except for START/Minute Plus.
ENJOY YOUR MICRO-
AND TOUCH CLOCK
will appear.
:
WAVE TOUCH CLEAR
after the power is reinstated. if

tiMer

1 Touch Timer/Clock pad and number 1.
2 Enter time.
3 Touch Timer/Clock pad again.
To cancel timer, touch
will

stOp/Clear

Touch the Stop/Clear pad to:
Erase if you make a mistake during programming.
1
Cancel timer.
2
Stop the microwave Drawer temporarily during timed
3
cooking.
return the time of day to the display.
4
Cancel a program during cooking, touch twice for timed
5
cooking.

Open Or ClOse MiCrOWave DraWer

(for.models.kb-6015k.&.kb-6014l)
always press the OPEn or CLOSE pad on the control panel
to open or close the microwave Drawer.
Do not push or pull the Microwave Drawer by hand,
except in case of emergency, such as a power failure. If
necessary, push or pull slowly.
(for.model.kb-6002l)
Open and close the microwave Drawer by gently pulling and
pushing with even pressure near the middle of the drawer
handle.
10
Stop/Clear
.