Download  Print this page
   

Advertisement

SPECIAL WARNING
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE THIS INSTALLATION MANUAL FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CLEARANCES AND DIMENSIONS
For SAFETY CONSIDERATIONS do not install drawer in any combustible cabinetry, which is not in accord with the stated
clearances and dimensions on pages 2 and 3. See Figure 1 (for 24") or Figures 3 and 4 (for 30") .
UNPACKING YOUR MICROWAVE DRAWER
• Remove all packing
materials from inside
the Microwave Drawer.
DO NOT REMOVE
THE WAVEGUIDE
COV ER, which is
located on the top
of t he M icrowave
Drawer.
• Remove the feature
sticker, if there is one.
Check the drawer for
any damage, such as
misaligned or bent
drawer, damaged drawer seals and sealing surfaces, broken
or loose Microwave Drawer guides and dents inside the cavity
or on the front side of the drawer. If there is any damage, do
not operate the Microwave Drawer and contact your dealer or
a SHARP AUTHORIZED SERVICER.
IMPORTANT NOTES TO THE INSTALLER
• Read all of the Installation Manual before installing the
Microwave Drawer.
• Remove all packing material before connecting the electrical
supply.
• Observe all governing codes and ordinances.
• Be sure to leave these instructions with the consumer.
Microwave Drawer

INSTALLATION MANUAL

Sealing
surface
Waveguide
cover
Sealing
surface
Oven
cavity
IMPORTANT NOTES TO THE CONSUMER
Keep this manual with your Operation Manual for future
reference.
• As when using any microwave oven generating heat, there are
certain safety precautions you should follow. These are listed
in the Operation Manual. Read all and follow carefully.
• Be sure your Microwave Drawer is installed and grounded
properly by a qualified installer or service technician.
IMPORTANT SAFETY INSTRUCTIONS
If the information in this manual is not followed
exactly, a fire or electrical shock may result that could cause
property damage, personal injury or death.
To reduce the risk of tipping, the Microwave
Drawer must be secured by a properly installed Anti-Tip
block.
• This Microwave Drawer must be electrically grounded in
accordance with local codes.
• Make sure the wall coverings and the cabinets around the
Microwave Drawer can withstand the heat generated by the
Microwave Drawer.
Never leave children alone or unattended in
the area where a Microwave Drawer is in use. Never leave the
drawer open when the microwave is unattended.
Stepping, leaning or sitting on the drawer
may result in serious injuries and can also cause damage to the
Microwave Drawer.
• Do not use the Microwave Drawer as a storage space.
This creates a potentially hazardous situation.
• Check that the time-of-day is in the display. If not, touch
Stop/Clear to prevent unintended use.
1

Advertisement

   Also See for Sharp KB-6014LW

   Related Manuals for Sharp KB-6014LW

   Summary of Contents for Sharp KB-6014LW

  • Page 1: Installation Manual

    Microwave Drawer and contact your dealer or • Make sure the wall coverings and the cabinets around the a SHARP AUTHORIZED SERVICER. Microwave Drawer can withstand the heat generated by the Microwave Drawer.
  • Page 2 CLEARANCES AND DIMENSIONS • Dimensions that are shown in Figure 1 (for 24") or Figures • Check location where the Microwave Drawer will be 3 and 4 (for 30") must be used. Given dimensions provide installed for proper electrical supply. minimum clearance.
  • Page 3 30" MICROWAVE DRAWER MEASUREMENTS Electrical outlet 6" location Anti-Tip block 3 1/2" 5" 4" 14 13/16" 28 7/16" to bottom opening Allow 1/4" of Anti-Tip overlap. block Allow 3/4" overlap. 14 3/4" opening 23 1/2" Allow 3/4" min depth overlap. 36"...
  • Page 4 The list includes common occurrences that are not the result of defective workmanship or materials in this range. Refer to the warranty in your Operation Manual for Sharp’s toll-free service number and address. Please call or write if you have inquiries about your microwave product and/or need to order parts.

This manual also for:

Kb-6015kKb-6002lKb-6014l

Comments to this Manuals

Symbols: 0
Latest comments: