Tandberg Data RDX QuikStation 4 Product Manual page 88

RDX QuikStation 4 and 8 Product Manual
By default, the iSCSI Devices Properties window displays information such as the volume name,
serial number (UUID), and iSCSI name for the logical device's iSCSI targets.
RDX QuikStation RDX Logical Volume logical device properties:
RDX QuikStation RDX Drive logical device properties:
1021970 Rev. D
Property Name
RDX Logical Volume Name
RDX Logical Volume UUID
RDX Logical Volume Capacity
Fixed Disk
iSCSI Name
Target ID/LUN
Status
Property Name
Vendor
Product
Revision
Serial Number
iSCSI Name
©2016-18 Tandberg Data GmbH
Description
Name of the RDX volume.
Unique identification number of the RDX volume.
Total capacity of the logical volume.
Provides a presentation to the iSCSI initiator.
Fixed disk shown as either On or Off.
Displays full iSCSI name.
Shows " 1/0 ".
Displays the operating status for the device of
either good , offline , or an error state.
Description
Shows the SCSI Inquiry Vendor ID.
Displays the SCSI Inquiry Product ID.
Provides the firmware version for RDX dock.
Lists the RDX Dock Serial Number.
The iSCSI name that identifies the device and is used to
connect the initiators (host computers) to the targets.
6 - Manage Tape Library Configurations
88
