Tandberg Data RDX QuikStation 4 Product Manual page 28

RDX QuikStation 4 and 8 Product Manual
The following dialog window opens.
2. In the Address field, type the IP address for the RDX QuikStation.
If you are using a port number other than the default, type the number in the Port field.
Otherwise leave the default 3260 port number.
3. Click Finish .
The dialog window displays the discovered iSCSI targets. Depending on how you
configured the logical device type for the RDX QuikStation you have, you will see one to
eight iSCSI targets.
1021970 Rev. D ©2016-18 Tandberg Data GmbH
3 - iSCSI Configuration
28
