Connection With A Personal Computer - Tanita SC-240 Instruction Manual

Connection with a personal computer

The USB interface enables input and output from this equipment.
Communication standards
Communication method
Signal speed
Data bit length
Stop bit
Flow control
Terminator
Note
• USB connector (B - Type 4 - pin female) are located on the back of the control box.
• Please provide your own cable as necessary as none are included.
USB cable : A - Type 4 - pin (male) - B - Type 4 - pin (male)
• You must install the necessary driver onto your PC, available download from http://www.tanita.com
or on the enclosed CD-Rom.
22
Parity
USB
Asynchronous Transmission
9600 baud
8 bits
None
1 bit
None
CR+LF