Cleaning And Maintenance - ProBreeze PB-V01 Instruction Manual

CLEANING AND MAINTENANCE

Always make sure that the vacuum cleaner is turned off and unplugged before cleaning.
1. Hold the vacuum cleaner over a bin, press the dust tank release button and
remove the dust tank.
2. Remove the filter unit from the dust tank.
3. Empty the dust tank by tipping and shaking it over the bin.
4. If necessary, clean the dust tank with a damp cloth and thoroughly dry.
5. Hold the filter unit firmly in one hand and turn the HEPA filter anticlockwise
towards the UNLOCK marking.
6. Remove the HEPA filter and use another vacuum cleaner or brush to remove the
dust from the surface. If required, clean the HEPA filter in cold or warm water and
thoroughly dry it prior to use.
7. Replace the HEPA filter within the filter unit and holding the filter unit firmly in one
hand turn the HEPA filter clockwise until the white arrow lines up with the UP
marking.
8. Return the filter unit to the dust tank and reattach the dust tank to the vacuum
cleaner so that it locks in place.
Notes:
- Regularly clean the vacuum cleaner housing with a damp cloth. Do not use any
abrasive or solvent based cleaner.
- Regularly clean the exhaust vents using a soft brush or dry cloth.
English | 6