Operating Instructions - ProBreeze PB-V01 Instruction Manual

OPERATING INSTRUCTIONS

Charging
Prior to first use and after the vacuum cleaner has run out of charge, charge the
appliance for a minimum of 6 hours.
1. Insert the plug into a suitable socket.
2. Ensure the vacuum cleaner is switched off.
3. Holding the vacuum cleaner in a vertical position locate it onto the charging base.
4. The charging indicator light will show red indicating that the vacuum cleaner is
charging.
5. When the vacuum cleaner is fully charged the charging indicator light will show
green.
Note: To ensure the longest possible lifecycle for the vacuum cleaner only charge it
when it is fully discharged and when fully charged turn the power off at the power
socket.
The charging base is wall mountable.
If you wish to attach the charging base to the wall accurately mark up the area you wish
to attach the charging base to and use wall plugs and screws to fix it in place.
Notes:
- The space between the screw holes must be 5.5 cm.
- Wall plugs and screws are not supplied.
Operation
This vacuum cleaner can be used for both dry and wet vacuuming.
Prior to using the vacuum cleaner ensure that both the HEPA filter and water separator
have been installed properly.
English | 4