Table of Contents
Advertisement
Controlling the Monitor with a PC
<Response format in Advanced operation >
When a command has been executed correctly
• Response when no ID number has been set
O
K
• Response when an ID number has been set
O
K
ID number of responding monitor
When a command has not been executed correctly*
• Response when no ID number has been set
E
R
• Response when an ID number has been set
E
R
* This is returned when there is no such command, or when the command cannot be used in the current state of
the monitor.
* If communication has not been established for reasons such as a bad connection between the PC and monitor,
nothing is returned (not even ERR).
* If no monitor has been assigned the designated ID number (e.g. if the command IDSL000
monitor with ID number: 2 is found), no response is returned.
E
Return code
(0D
, 0A
)
H
H
Space (20
)
H
SPC 0
0
1
Return code
(0D
, 0A
)
H
H
R
Space (20
)
H
R
SPC 0
0
1
ID number
A response is returned when execution of the
pertinent command is finished.
Return code
(0D
, 0A
)
H
H
Return code
(0D
, 0A
)
H
H
(Continued)
is used, but no
Advertisement
Table of Contents
