Sharp PN-455RU Operation Manual page 42

Controlling the Monitor with a PC
IDSL ....... The parameter of this command sets the ID number of the monitor.
The monitor is subject to the next command.
Example:
IDSL0002 ← The next command is for the monitor with ID number: 2.
WAIT ← Searching for monitor with ID number: 2
002 ← Found monitor with ID number: 2
OK
VOLM0030 ← Sets volume of monitor with ID number:  to 0.
WAIT ← Processing
002 ← OK response from monitor with ID number: 2
OK
VOLM0020 ← Sets volume to 20.
001 ← The volume of the monitor with ID number=1
OK
IDLK ....... The parameter of this command sets the ID number of the monitor.
The monitor is subject to all subsequent commands.
Example:
IDLK0002 ← Following commands are for the monitor with ID number: 2.
WAIT ← Searching for monitor with ID number: 2
002 ← Found monitor with ID number: 2
OK
VOLM0030 ← Sets volume of monitor with ID number: 2 to 30.
WAIT ← Processing
OK 00
VOLM0020 ← Sets volume of monitor with ID number: 2 to 20.
WAIT
OK 00
IDLK0000 ← Canceling fixed ID number setting
WAIT ← Canceling IDLK
002 ← Cancelation complete
OK
VOLM000
001 ← The volume of the monitor with ID number=1
OK
IDCK ...... Provides screen display of the ID number currently assigned to a monitor, and the ID
number currently set for IDLK (if any).
Example:
(After executing IDLK000)
IDCK0000
ID:001 IDLK:002 ← Returned response. The ID number is also displayed on the monitor screen.
IDCK000+
WAIT
ID:00 IDLK:00
ID:00 IDLK:00
ID:00 IDLK:00
ID:00 IDLK:00
0
E
(the one directly connected to the PC) is set to 0.
(the one directly connected to the PC) is set to 0. (IDLK is canceled.)
← (Parameter has no meaning.)
← Repeater control
(If a command is used with repeater control, ID designation using IDSL or
IDLK is canceled.)
(Continued)
The IDSL command is
effective only once, for the
immediately succeeding
command.
The IDLK command remains
effective until it is canceled, or
power is shut off.