Connecting The Tv To A Power Source - Sharp LD-23SH1U Operation Manual

Connecting the TV to a power source

CAUTION!
- When connecting, ensure that the TV is switched off.
- Always use the AC adapter that came with the TV.
- Be careful not to over bend the cable or add extension cords as this could lead to a malfunction.
See page E10 for information on removing/replacing the terminal cover.
1. Connect the AC adapter to the power input terminal.
Power input terminal
AC adapter (supplied)
2. Plug the power cord into the AC adapter and then place the power plug into an AC outlet.
Power cord (supplied)
AC outlet
AC adapter (supplied)
Note:
- If the TV does not operate, disconnect the power cord from the AC outlet and reconnect it again.
The setup must be completed in the proper order for the TV to function.
E22