Advertisement
Parts Included:
1. Rear Panel
2. Screw A (x5) - Pan Head, course pointed screw for wood
3. Screw B (x5) - Truss Head, self-drilling screw for metal studs
4. Plastic Grommet / Drain Hose Bushing
Tools Required:
• Drill/Screwdriver
Step 1.
Insert Grommets
Insert plastic grommet included with
the in-wall dehumidifier to the back of
the unit after punching out the knock
out hole for the drain hose.
Insert plastic grommet included with
this kit to the back of the rear panel.
In-Wall Dehumidifier
Rear Panel Kit
Part No. 4037768
REMOVE DRAIN HOSE
4038985
KNOCK OUT
4201 Lien Rd Madison, WI 53704 • TOLL-FREE 1-800-533-7533 • www.thermastor.com • sales@thermastor.com
1
DRAIN HOSE
4037854
BUSHING
(x5)
2
(x5)
3
4
CONTINUED
TS-1056 7/18 Rev B
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Therma-Stor 4037768
Summary of Contents for Therma-Stor 4037768
-
Page 1: Tools Required
In-Wall Dehumidifier Rear Panel Kit Part No. 4037768 Parts Included: (x5) 1. Rear Panel 2. Screw A (x5) - Pan Head, course pointed screw for wood 3. Screw B (x5) - Truss Head, self-drilling screw for metal studs 4. Plastic Grommet / Drain Hose Bushing... - Page 2 Step 2. Install Drain Hose Route the drain hose through the rear panel and the dehumidifier to connect to the drain pan. Be sure the drain hose knock out and the electrical wiring knock out on the rear panel line up with the dehumidifier.
Need help?
Do you have a question about the 4037768 and is the answer not in the manual?
Questions and answers