Channel Setup - Sharp LC-45GD6U Operation Manual

Basic adjustment settings
Antenna setting
Make sure what kind of connection is made with your TV when
selecting "Air" or "Cable" for ANALOG-A, B and DIGITAL.
6
Press c/d to select "Air" or "Cable" for
ANALOG-A, then press a/b to move down.
Press c/d to select "Air" or "Cable" for
ANALOG-B, then press a/b to move down.
Press c/d to select "Air" or "Cable" for
DIGITAL, then press a/b to move down.
Press ENTER to enter the setting.
• This operation makes the Channel search for
ANALOG-A, B and DIGITAL.
• There are 3 kinds of CATV system, including
Standard, HRC and IRC. Select the one matches
to your TV. Select Auto when you do not know
which one to select for ANALOG antenna.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
7
Press c/d to select "Yes" for ANALOG-A,
then press a/b to move down.
Press c/d to select "Yes" for ANALOG-B,
then press a/b to move down.
Press c/d to select "Yes" for DIGITAL (Air/
Cable), and press a/b to move down.
Select "Search Start", and then press
ENTER.
Language
Air/Cable
CH Search
Searching TV channels
[ Setup ... EZ Setup ... CH Search ]
MENU
ANALOG-A Air
[ Setup ... EZ Setup ... CH Search ]
MENU
ANALOG-B Air
[ Setup ... EZ Setup ... CH Search ]
MENU
DIGITAL Air
NOTE
• If no channel is found, make sure what kind of connection is
made with your TV and try EZ setup again.
• Make sure what kind of connection is made with your TV when
selecting "Air" or "Cable" for ANALOG-A, B and DIGITAL.
ANALOG-A Yes No
ANALOG-B Yes No
DIGITAL (Air) Yes No
Search Start
Example
[ 25 ] Found [ 20 ]
[ 25 ] Found [ 20 ]
[ 25 ] Found [ 25 ]

Channel Setup

If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Antenna setting
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "CH Setup", and then
press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 78 for
setting a secret number.
Air/Cable
CH Search
CH Memory
4
Press a/b to select "Air/Cable", and then
press ENTER.
5
Press c/d to select "Air" or "Cable" for
ANALOG-A, then press a/b to move down.
Press c/d to select "Air" or "Cable" for
ANALOG-B, then press a/b to move down.
Press c/d to select "Air" or "Cable" for
DIGITAL, then press a/b to move down.
Press ENTER to enter the setting.
Air/Cable
CH Search
CH Memory
NOTE
• Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable" for ANALOG-A, B and
DIGITAL.
• There are 3 kinds of CATV system, including Standard,
HRC and IRC. Select the one matches to your TV. Select
Auto when you do not know which one to select for
ANALOG antenna.
ANALOG-A Air
ANALOG-B Air
DIGITAL Air
Example
ANALOG-A Air
ANALOG-B Air
DIGITAL Air
29