MCi JH-400B Series Technical Manual page 27

SYSTEM RESOLUTION
lOOdb Fader range is divided into 250 steps of .4db/step. This
translates into full 8-bit resolutiop.
SYSTEM ACCURACY
A-to-D and D-to-A is adjustable to better than System Resolution.
System Resolution (0.4db) becomes System Accuracy when this
adjustment is properly made.
DITHER (exclusive of system 0.4db maximum resolution)
0. 4db maximum
CUMULATIVE SYSTEM ERROR (unlimited passes)
Total error is 0.4db. This
~rror
does NOT accumulate. (READ
mode ONLY. Other modes are subject to operator changes.)
SCAN TUm
102 milliseconds.
The SCAN TIME is NOT a delay, and does NOT accumulate.
BOUNCE DELAY
1.2ms per pass.
The BOUNCE DELAY IS a delay which accumulates with each UPDATE pass.
DATA RATE
9600 Baud (14kHz bandwidth)
COMPATIBILITY~
Tapes made on a standard Automated JH-400B or JH-500 Console may
be played back on any other standard Automated JH-400B or JH-500
console.
POWER REQUIREMENTS
Separate power supply provides:
+5v @ 5 amps: ±15v @ 3 amps.
Line requirements: lOOv @ 2 amps: 120v @ 2 amps; 240v @ 1 amp.
MECHANICAL
HOUSING
The Processor, the Digitizers, and the Power Distribution boards
are housed in a case which mounts underneath the JH-400B Console.
Specifications subject to change without prior notification.
JH-400B
Page 8-7