Preparation; Using The Remote Control; Batteries For The Remote Control - Sharp LC-13S1U, LC-15S1U, LC-20S1U Operation Manual

PREPARATION

Using the Remote Control

I
Use the remote control by pointing it towards the remote
control sensor window on the main unit. Objects between
the remote control and sensor window may prevent proper
operation.
Cautions regarding use of the remote control
I
Do not expose the remote control to shock.
In addition, do not expose the remote control to liquid, and
do not place in an area with high humidity.
I
Do not install or place the remote control under direct
sunlight. The heat may cause deformation of the unit.
I
The remote control may not work properly if the remote
control sensor window of the main unit is under direct
sunlight or strong lighting. In such case, change the angle of
the lighting or LCD TV set, or operate the remote control
closer to the remote control sensor window.

Batteries for the Remote Control

Before using the LCD TV set for the first time, install two ("AAA" size) batteries (supplied). When the
batteries become depleted and the remote control fails to operate, replace the batteries with new
("AAA" size) batteries.
1
Open the battery
cover.
I Slide the cover while
pressing the (Y) part.
Caution!
Cautions regarding batteries
Improper use of batteries can result in chemical leakage and/or explosion. Be sure to follow the instruc-
tions below.
• Place batteries with their terminals corresponding to the (+) and (–) as indicated in the compartment.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
battery and/or cause the old battery to leak chemicals.
• Remove batteries when they become weak.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a
cloth.
• The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
• If the remote control will not be used for an extended period of time, remove the batteries from the
remote control.
8
2
Insert two ("AAA" size)
batteries.
+
–
I Position the positive and
negative ends of the batteries
as indicated in the compart-
ment.
POWER OPC HEADPHONE
HEADPHONE jack
OPC indicator
POWER indicator
Remote control
sensor
OPC sensor
3
Close the battery
cover.
I Engage the claw on the
cover into the battery
housing and slide shut.