Table of Contents
Advertisement
2 MOunTIng InSTRucTIOnS
2.3.5
Remove the original preload adjuster.
2.3.6
Remove the lower and upper attachments of
the original shock absorber. Remove the origi-
nal shock absorber.
2.3.7
Remove the upper left screw to the rear sub
frame.
2.3.8
Install the Öhlins shock absorber. Use the
original screws for the upper and lower attach-
ments. Compress the suspension slightly
before tightening. Tightening torque according
to vehicle service manual.
2.3.9
Use appropriate tool and carefully bend the
upper left point of the rear sub frame, just
enough to squeeze the preload adjuster hose
between the frame and the rear sub frame.
2.3.7
2.3.9
2.3.10
Install the preload adjuster motor in the rubber
mounts assembled in step 2.
2.3.11
Reinsert the upper left screw to the rear sub
frame. Tightening torque according to vehicle
service manual.
8
2.3.10
Advertisement
Table of Contents
