LENCO CS-200 Owner's Manual page 9

OPERATION
d) MASK DPI or MASK ALL mode
The AF frequency (which has
different PI or NO RDS signal with
high field strength) is masked during
checking PI when the unit searches
AF. The unit doesn't search this AF
(DIP) for few minutes. In the case
of the AF of NO RDS signal with
high field strength, if the real AF is
wrongly masked as DIP by some
interference, the unit hesitates to
search real Afs. For this reason, the
unit has the user option (MASK DPI)
which doesn't mask the AF of NO
RDS signal with high field strength.
In MASK DPI mode, the wrong
sound or long mute (according to PI
SOUND or PI MUTE) can be heard
from the AD station which has NO
RDS signal and of which the field
strength is higher than that of the
currently tuning AF (station).
But, these phenomenon are rare
and the user will hardly hear the
wrong sound in whole Europe.
- MASK DPI mode:
Masked only the AF which has
different PI.
- MASK ALL mode:
Masked the AF which has
different PI and NO RDS signal
with high field strength.
e) BEEP 2'ND, BEEP ALL, BEEP OFF
mode
The situation of beep sound is
selected.
For Electronic Volume:
The 3 mode is selected as also
AUDIO CONTROL
AUDIO CONTROL
For Digital Rotating Volume:
The 3 mode is selected as AUDIO
CONTROL knob (11 & 12).
- BEEP 2'nd mode:
The beep is only generated when
all allowed double key is pressed
long (1 sec).
e.g.
When Preset Button (14) is
pressed.
• LOUDNESS
• DISPLAY
• SELECT MODE
button (11) or
button (12).
• LIQUID CRYSTAL DISPLAY
• RESET
9
When BND/LOU Button (13) is
pressed.
When AMS Button (18) is pressed.
- BEEP ALL mode:
The beep is generated when every
key is pressed.
- BEEP OFF mode:
The beep is disabled.
Press BND/LOU button (13) for several
seconds to reinforce the bass output.
Press DSP button (15) to operate as
the conversion of each display mode
as follows:
- In case of receiving a RDS station
In radio mode: -> PS -> CT ->
FREQ. -> PTY ->
In CD mode: -> CD -> CT -> PS ->
FREQ. -> PTY ->
- In case of no receiving CT or PTY
information, the display shows as
"NO CLOCK" or "NO PTY".
- In case of receiving a non RDS
station
In radio mode: -> "NO CLOCK" ->
FREQ. -> "NO PTY" ->
In CD mode: -> CD -> CT -> FREQ.
-> "NO PTY" ->
Each displaying time is several
seconds, and come back to 1'st
position after several seconds.
Notes:
- CT = clock time
- FREQ. = frequency
Press MOD button (6) to choose
desired listening mode.
(e.g. radio mode to CD (MP3) mode)
Exhibit current frequency and activated
functions on the display (8).
Reset button (23) is placed on the front
panel and must be activated with either
a ball point pen or thin metal object.