Reversing The Doors - Beko CDA 645 F Installation, Operation & Food Storage Instructions

REVERSING THE DOORS

(You may need somebody to help you.)
1- Switch off the appliance at the socket outlet and pull out the mains plug.
2- Remove all loose items and fittings and food, if any, from inside the appliance and
door racks
.
3- Unscrew the bolts and remove the middle hinge while holding doors. (1)
4- Remove the fridge door from the top hinge. (2)
5- Remove the freezer door. (3)
6- Remove the plastic covers on the front top trim. (4)
7- Unscrew the bolts of the top hinge and remove top hinge. (5)
8- Reposition plugs on the opposite side. (6)
9- Remove the kick plate. (7)
10- Carefully tilt the appliance on its back. (8)
(You may need somebody to help you.)
11- Unscrew and remove the left hand side front feet. (9)
12- Unscrew and remove the bottom hinge. (10)
13- Remove the plastic cover and fit the tap which is in the plastic bag to the
other side. (11)
14- Unscrew and remove the middle hinge bushing from fridge door. (12)
15- Screw and fix the new middle hinge bushing which is supplied in plastic bag to the
other side. (13)
16- Reposition the hinge bushing and the tap on the freezer door. (14)
17- Unscrew and reposition the bottom hinge bushing. (15)
18- Unscrew bolt of the pin on the bottom hinge. Fit the pin to the other hole on
the hinge and tighten the bolt on the new position. (16)
19- Fit the bottom hinge and other feet, and tighten the screws. (17)
20- Remove the plastic tap to the opposite side on the front bottom trim. (18)
21- Fit the front bottom trim to the bottom hinge and other feet. (19)
22- Rotate the top hinge 180°. Unscrew the hinge pin and re-tighten it to the
opposite side. (20)
23- Fit the top hinge and tighten the bolts. (21)
24- Fit the plastic cover on the front top trim. (22)
25- Locate the freezer door to the bottom hinge and attach to the cabinet. (23)
26- Locate the middle hinge on the freezer door (24) and put the freezer door
between the top and middle hinge carefully. (25)
27- Fit the middle hinge. Adjust the doors and tighten the bolts. (26)
28- Carefully stand your appliance (you may need somebody to help you) adjust
the front feet.
29- Put back all, loose items and fittings.
30- Wait for at least 4 hours to allow the system to settle before switching on.
31- Once the correct storage temperatures have been reached in the appliance, put back
all the food.
7
4
5
4
8
1
6
45 °
10
7
9
22
20
21
22
180°
24
26
17
19
19
16
8
11
11
2
12
14
13
3
15
25
23
18