Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Tecnomac BK+ 5.16 A
Summary of Contents for Tecnomac BK+ 5.16 A
- Page 1 Blast Chillers EasyChill Instruction manual ChillRapid BK+5 BK+10 BK+15 SurRapid...
- Page 2 Gentile Cliente, Sehr geehrter Kunde! La ringraziamo per aver preferito uno dei Wir danken Ihnen für Ihre Wahl eines nostri prodotti, frutto di lunga esperienza unserer Produkte, welches das Ergebnis e di una continua ricerca per un prodotto einer langen Erfahrung und stetiger superiore in termini di affidabilità, Forschungsarbeit ist.
- Page 4 BUTTONS AND LEDS Start/Stop Cycle status Soft/hard positive blast chilling button (+3°c) Blast freezing button (-18°c)/ice cream cycle Blast chilling mode Decrease value key Increase value key STATUS ICONS Door alarm LED Timed cycle LED (yellow) Temperature cycle LED (yellow) Positive blast chilling cycle LED (green) Hard blast chilling cycle LED (yellow) Blast freezing cycle LED (green)
- Page 5 PREFACE CAUTION • This manual is an integral part of the pro- duct, providing all the information required to ensure correct installation, operation and THE FOLLOWING OPERATIONS AND THOSE HIGHLIGHTED maintenance of the machine. BY THIS SYMBOL MUST NOT BE PERFORMED BY THE APPLIANCE USER •...
-
Page 6: Table Of Contents
INDEX Description Page Description Page GENERAL DOCUMENTATION PARAMETERS GENERAL INFORMATION ......2 PARAMETER MODIFICATION ACCESS ....9 INSTALLATION . -
Page 7: General Documentation
1. GENERAL DOCUMENTATION 1.1 GENERAL INFORMATION • This manual is an integral part of the product, providing all the information required to ensure correct installation, ope- ration and maintenance of the machine. • Read the manual carefully, making reference to it for machine operation. -
Page 8: Plate Data
2. INSTALLATION Avoid THESE OPERATIONS MUST BE • direct exposure to sunlight; PERFORMED BY A CERTIFIED • closed sites with high temperatures and poor air circulation; • installing the machine near sources of heat. INSTALLATION TECHNICIAN ONLY 2.1 DATA PLATE INFORMATION •... -
Page 9: Remote Refrigerator Unit Connection
2.6 REFRIGERATION COMPONENT CONNECTIONS 2.9 SAFETY AND CONTROL SYSTEMS REMOTE ASSEMBLIES • Door microswitch: appliance power lines are sized for installation distances of shuts down fan operation in the cell when the door is ope- up to 10 metres. for greater distances, seek advice from. ned. -
Page 10: Shutdown Methods
3. ADVICE TO ENSURE EFFICIENT APPLIANCE OPERATION 3.1 SHUT-DOWN PROCEDURES d) Position the core probe at the centre of the largest product In the event of emergency, shut down the appliance by swit- or food item; make sure that the tip of the probe does not ching off power at the main panel, by means of the knife protrude or touch the tray. -
Page 11: Programming And Operating Instructions
4. PROGRAMMING AND OPERATION INSTRUCTIONS 4.3 OPERATION IN THE EVENT OF A MALFUNCTION, It is recommended always to pre-cool the machine the CALL THE CERTIFIED TECHNICIAN first time blast-chilling or deep freezing is performed. The work cycle is optimized in this way by reducing the time (see chap. -
Page 12: Selecting Positive Hard Blast Chilling Timed Cycle
4.3.3 Selecting positive hard blast chilling timed cycle Once the set blast chilling temperature has been reached in With the machine in standby, select the positive blast chilling the product core, the machine will automatically go into sto- button twice. The display will show the value 90 min with rage mode. -
Page 13: Quick Selection Of Positive Blast Chilling
4.3.7 quick selection of positive blast chilling indefinite timed 4.5 RAPID DISPLAY OF TIME AND TEMPERATURE VALUES cycle With the machine in operation, the following operation va- With the machine in standby, select the positive blast chilling lues can be seen: button for at least 3", a positive cycle for an indefinite •... -
Page 14: Parameters
5. PARAMETERS PASS 5.1 PARAMETER MODIFICATION ACCESS 5.4 USB DATA RECORDER (OPTIONAL) The parameters can be accessed only when the machine is • The USB data recorder will register into a .txt file all the data off. Just press the blast chilling button for three seconds, during the cycles of the machine: Blast Chilling or Freezing will appear on the display and the up... -
Page 15: Great Technology And Process Value
6 GREAT TECHNOLOGY AND PROCESS VALUE • Putting freshly cooked food directly in the storage unit is a 6.3 QUICK BLAST FREEZING mistake! Cooling is static and not very powerful, the chilling function available only in certain models time is too long and bacteria develop rapidly in large quan- From +70°c to -18°c at the product core as quickly as possibly tities. -
Page 16: Alarms List
7 ALARMS LIST Note: Faults probes Once the sensor is replaced, the alarm di- Probe not inserted alarm sappears after 10 seconds. The sensor alarms at -50°C are disa- Cause: failure to insert the probe inside the product du- bled during freezing at -18°C and during the ice cream ring execution of temperature controlled blast chilling hardening function. -
Page 17: Ordinary Maintenance
8 ORDINARY MAINTENANCE The condenser has sharp edges. During the THESE OPERATIONS MUST BE above-mentioned operations, always wear PERFORMED ExCLUSIVELY safety gloves, safety glasses and masks to protect the respiratory tract. BY A CERTIFIED INSTALLER The information and instructions in this chapter are intended 8.3 CELL CLEANING for all personnel who operate the machine: the user, main- •... -
Page 18: Defrost Water Draining
Evaporator cleaning 7.5 DEFROST WATER DRAINING • The interior of the evaporator must be cleaned periodically • the system is set up for automatic (in certain models) in the following manner: and manual defrosting when necessary. • make sure that the evaporator water is correctly draining in Fig. - Page 19 BLAST CHILLER ISTRUCTION...
- Page 20 Via del Lavoro, 9 - C.P. 172 - 31033 Castelfranco Veneto (TV) - ITALY - EU Tel. +39 0423 738451 - Fax +39 0423 722811 - tecnomac@castelmac.it - www.tecnomac.eu...
Need help?
Do you have a question about the BK+ 5.16 A and is the answer not in the manual?
Questions and answers