View Mode For 4:3 Programs; View Mode For Hd Programs - Sharp AQUOS LC-42D64U Operation Manual

Useful adjustment settings
Ct_/SAI pro FU CTION
0
SOURCE LIGHT
(ED 0D (}E)
REC
(3D (3D (_D
FREEZE MENU
O O
Press VIEW MODE.
The View Mode menu displays.
,, The menu lists the View Mode options seiectabie
for the type of video signal currently being
received.
Example
Side Bar
The following modes are available for HD programs.
Stretch:
Suitable for viewing wide-screen 1.78:1 aspect ratio program,
stretch mode will still show very thin black bands at the top
and bottom of the screen.
Dot by Dot (1080i/p only):
Detects tlqe resolution of the signal and displays an image with
the same number of pixels on the screen.
Full Screen (720p only):
You can select "Full Screen" only when receiving a 720p
signal.
S.Stretch (Smart stretch):
Suitable for stretching 4:3 programs to fill the screen.
Zoom:
Suitable for viewing wide-screen 2.35:1 aspect-ratio programs
in full
screen.
Press VIEW MODE or A/T while the View
Mode menu is displayed to select a desired
item on the menu.
•
You call sequentiallyselect a Vbw Mode that has
its own aspect ratio.
Side Bar:
Suitabb for viewing conventional
4:3 programs in their normal
format.
S.Stretch (Smart stretch):
Suitabb for stretching 4:3
programs to fill the screen.
When using Dot by Dot, it is possible to see noise or
bars around different outer portions of the screen. Please
change view mode to correct this.
_J Zoom:
Suitabb for viewing wide-screen
2.35:1 anamorphic DVDs in full
screen.
Stretch:
This mode is useful for 1.78:1
DVDs.
When viewing 1.85:1 DVDs, stretch
mode will still show very thin black
bands at the top and bottom of the
screen.
(D" 35