View Mode For 4:3 Programs; View Mode For Hd Programs - Sharp Aquos LC-37D90U Operation Manual

Useful adjustment settings

View Mode for 4:3 Programs

Press VIEW MODE.
1
• The View Mode menu displays.
• The menu lists the View Mode options
selectable for the type of video signal currently
being received.
Press VIEW MODE or a / b while the View
2
Mode menu is still on the screen.
• You can sequentially select a View Mode that
has its own aspect ratio.
Side Bar:
Suitable for viewing conventional 4:3
programs in their normal format.
S.Stretch (Smart stretch):
Suitable for stretching 4:3 programs
to fi ll the screen.
Zoom:
Suitable for viewing wide-screen
2.35:1 anamorphic DVDs in full
screen.
Stretch:
This mode is useful for 1.78:1 DVDs.
When viewing 1.85:1 DVDs, stretch
mode will still show very thin black
bands at the top and bottom of the
screen.
View Mode
Side Bar
S. Stretch
Zoom
Stretch

View Mode for HD Programs

The following modes are available for HD programs.
Stretch:
Suitable for viewing wide-screen 1.78:1 aspect ratio program,
stretch mode will still show very thin black bands at the top
and bottom of the screen.
Dot by Dot (1080i/p only):
Detects the resolution of the signal and displays an image
with the same number of pixels on the screen. When a 720p
signal is being input, the image will be delivered in full screen.
S.Stretch (Smart stretch):
Suitable for stretching 4:3 programs to fi ll the screen.
Zoom:
Suitable for viewing wide-screen 2.35:1 aspect-ratio
programs in full screen.
NOTE
• When using Dot by Dot, it is possible to see noise or
bars around different outer portions of the screen. Please
change view mode to correct this.
49