Omegon Push+ Instruction Manual page 9

Step 7
Select "Port Configuration" tab and change so that it
reads as shown:
Serial Port: use the data from 7.3 Step 10
Speed: "115200"
Data bits: "8"
Parity: "N"
Stop bits: "1"
Timeout (ms): "1000"
Interval Timeout: "400"
Step 8
Click on "Save Settings" when finished.
Figure 19. Port configuration.
Step 9
Select the "Coordinates" tab and click "Connect".
The red square will turn green and some numbers will
show up in the upper blank spaces.
You are now ready to start using "Cartes du Ciel"!
Figure 20. Click "Connect".
Reproduction of part or all of the contents of this document in any form is expressly prohibited other than for individual use only. All text, images and labels are property of nimax Gmbh.