Av Mode; Input Signal (For Pc Format) - Sharp Aquos LC 46D62U Operation Manual

Useful adjustment settings

AV MODE

AV MODE gives you 7 viewing options to choose from
to best match the surrounding environment of the TV,
which can vary due to factors like room brightness,
type of program watched or the type of image input
from external equipment.
Press AV MODE.
1
• Current AV MODE displays.
Press AV MODE again before the mode
2
displayed on the screen disappears.
• The mode changes as shown below.
When the input source is TV, INPUT 1, 2 or 3 terminals
(Example)
AV MODE: STANDARD
AV MODE: DYNAMIC
AV MODE: DYNAMIC (Fixed)
When the input source is INPUT 4 or 5 terminals
(Example)
AV MODE: STANDARD
AV MODE: DYNAMIC
AV MODE: DYNAMIC (Fixed)
NOTE
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
• "Enhanced Picture Contrast" technology detects the source
video characteristics and smoothly adjusts the screen
brightness accordingly to realize deeper black levels.
36
AV MODE: MOVIE
AV MODE: GAME
AV MODE: USER [TV]
AV MODE: MOVIE
AV MODE: GAME
AV MODE: PC
AV MODE: USER [ ]
Selected item
For a highly defi ned image in a normal
STANDARD
lighting
[Enhanced Picture Contrast: on]
MOVIE For a movie
[Enhanced Picture Contrast: off]
Lowers image brightness for easier
GAME
viewing
[Enhanced Picture Contrast: off]
For PC
PC
[Enhanced Picture Contrast: off]
USER Allows the user to customize settings
as desired. You can set the mode for
each input source.
[Enhanced Picture Contrast: off]
Changes the image and sound
DYNAMIC (Fixed)
settings to the factory preset values.
No adjustments are allowed.
[Enhanced Picture Contrast: on]
For a clear-cut image emphasizing
DYNAMIC
high contrast, useful for sports
viewing
[Enhanced Picture Contrast: on]

Input Signal (for PC format)

Some input signals may have to be registered manually
to display properly.
The pair of input signals (resolutions) in the list below
are not distinguishable when received. In such case,
you have to set the correct signal manually. After
setting once, it will display when the same signal
(resolution) is input again.
1024 g 768
NOTE
• You can only select the "Input Signal" on the Setup menu
when receiving one of the 2 input signals listed above.
Press MENU to display the MENU screen,
1
and then press c / d to select "Setup".
Press a / b to select "Input Signal", and then
2
press ENTER.
Press a / b to select the desired input signal
3
on the display.
Press MENU to exit.
4
Description
1360 g 768