Initial Setup - Sharp Aquos LC 46D62U Operation Manual

Watching TV

Initial setup

When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels where you live.
Perform the following steps before you press TV POWER on the remote control unit.
Insert the batteries into the remote control unit. (See page 8.)
1.
2. Connect the antenna cable to the TV. (See page 12.)
Plug in the AC cord to the AC outlet. (See page 7.)
3.
Language setting
Select from among 3 languages: English, French and
Spanish.
Press a / b to select the desired language
1
listed on the screen, and then press ENTER.
Language
Air/Cable
CH Search
Antenna setting
Make sure what kind of connection is made with your
TV when selecting "Air" or "Cable".
Press c / d to select "Air" or "Cable".
2
Press ENTER to enter the setting.
Language
Air/Cable
CH Search
16
English
Français
Español
Example
Air Cable
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
When "Air" is selected in Antenna
3
setting:
Press c / d to select "Start", and then press
ENTER.
Language
Air/Cable
CH Search
When "Cable" is selected in Antenna
setting:
Press a / b to select "Analog & Digital
Search Start" to search both analog and
digital broadcasts or "Analog Search Start"
to search only analog broadcasts, and then
press ENTER.
Language
Air/Cable
CH Search
• The Channel search will start automatically.
• To exit the Channel search screen, select
"Cancel", and then press ENTER.
Example
CH Search
[ 25 ]
Air
Air
2
Audio
NOTE
• If no channel is found, confi rm the type of connection made
with your TV and try EZ Setup again. (See page 22.)
Start Cancel
Analog & Digital Search Start
Analog Search Start
Cancel
[ 20 ]
Found
ANALOG
: MONO