Sharp Aquos LC 26D6U Operation Manual page 50

Other viewing options
1
2
1
2
8
2
4
6
3
4
3
7
3
5
1
Cable control buttons
When the FUNCTION is set to CBL/SAT the cable
converter connected to the TV can operate using 1 to
4.
1 SOURCE POWER
Turns the cable converter power on and off.
2 0 – 9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
3 FLASHBACK *
Press to switch between the current channel and the
channel you were watching immediately before.
CH r/s
4
Press CH r or CH s to tune in a higher or lower
channel.
* Some manufacturers do not preset FLASHBACK.
NOTE
• CABLE and SAT cannot be selected at the same time.
SAT control buttons
1 SOURCE POWER
Turns the Satellite broadcast tuner power on and off.
•
2 0 – 9, (DOT)
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
3 ENTER, a/b/c/d
ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the SAT
GUIDE screen or SAT MENU screen.
NOTE
• CABLE and SAT cannot be selected at the same time.
VCR control buttons
The remote control unit button will function as follows
when the FUNCTION of the remote control unit is set
to VCR.
• When the input selector button having the same
number as the input terminal connecting the VCR is
pressed, the VCR can operate using 1 to 8.
CH r/s
1
Press to select the channel of the TV tuner on the VCR.
2 SOURCE POWER
Turns the power of the VCR on and off.
F
3
Sets pauses and still pictures.
G
4
Rewinds the tape and allows picture search.
H
5
Stops the tape transport.
6 REC
Starts recording.
J
7
Rapidly advances the tape and allows picture search.
I
8
Starts playback.
49